View TLP18007_4131903.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP180
TOSHIBA Photocoupler GaAs Ired & Photo-Transistor
TLP180
Programmable Controllers AC / DC-Input Module Telecommunication
The TOSHIBA mini flat coupler TLP180 is a small outline coupler, suitable for surface mount assembly. TLP180 consist of a photo transistor, optically coupled to a gallium arsenide infrared emitting diode connected inverse parallel, and can operate directly by AC input current. * * * * * Collector-emitter voltage: 80 V (min.) Current transfer ratio: 50% (min.) Rank GB: 100% (min.) Isolation voltage: 3750Vrms (min.) UL recognized: UL1577, file No. E67349 BSI approved: BS EN60065:2002, certificate no.8285 BS EN60950-1:2002, certificate no.8286 TOSHIBA Weight: 0.09 g 11-4C1 Unit in mm
Pin Configuration (top view)
1 3 1: Anode, Cathode 3: Cathode, Anode 4: Emitter 6: Collector 6 4
1
2007-10-01
TLP180
Absolute Maximum Ratings (Ta = 25C)
Characteristic Forward current LED Forward current detating (Ta53C) Pulse forward current Junction temperature Collector-emitter voltage Emitter-collector voltage Detector Collector current Power dissipation Power dissipation derating (Ta 25C) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature(10s) Total package power dissipation Total package power dissipation derating (Ta 25C) Isolation voltage (AC,1min.,R.H. 60%) (Note 2) (Note1) Symbol IF(RMS) IF / C IFP Tj VCEO VECO IC PC PC / C Tj Tstg Topr Tsol PT PT / C BVS Rating 50 -0.7 1 125 80 7 50 150 -1.5 125 -55~125 -55~100 260 200 -2.0 3750 Unit mA mA / C A C V V mA mW mW / C C C C C mW mW / C Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pulse width 100s,f=100Hz Note 2: Device considered a two terminal device: Pins 1 and 3 shorted together and 4 and 6 shorted together.
Recommended Operating Conditions
Characteristic Supply voltage Forward current Collector current Operating temperature Symbol VCC IF(RMS) IC Topr Min. -25 Typ. 5 16 1 Max. 48 20 10 85 Unit V mA mA C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document.
2
2007-10-01
TLP180
Electrical Characteristics (Ta = 25C)
Characteristic LED Forward voltage Capacitance Collector-emitter breakdown voltage Emitter-collector breakdown voltage Detector Symbol VF CT V(BR) CEO V(BR) ECO Test Condition IF = 10 mA V = 0, f = 1 MHz IC = 0.5 mA IE = 0.1 mA VCE = 48 V (ambient light below 1000Lx) (Note3) VCE = 48 V (ambient light Ta = 85C below 1000Lx) (Note3) V = 0, f = 1 MHz Min. 1.0 80 7 Typ. 1.15 60 0.01 (2) 2 (4) 10 Max. 1.3 0.1 (10) 50 (50) Unit V pF V V A A pF
Collector dark current
ICEO
Capacitance (collector to emitter)
CCE
Note 3: Please use standard electric lamp to light up the device's marking surface.
Coupled Electrical Characteristics (Ta = 25C)
Characteristic Current transfer ratio Symbol IC / IF Test Condition IF = 5 mA, VCE = 5 V Rank GB IF = 1 mA, VCE = 0.4 V Rank GB IC = 2.4 mA, IF = 8 mA Collector-emitter saturation voltage Off-state collector current CTR symmetry VCE (sat) IC = 0.2 mA, IF = 1 mA Rank GB VF = 0.7V, VCE = 48 V IC (IF = -5mA) / IC (IF = 5mA) (Note4) MIn. 50 100 -- 30 -- -- -- -- 0.33 Typ. -- -- 60 -- -- 0.2 -- 1 1 Max. 600 600 -- -- 0.4 -- 0.4 10 3 A -- V Unit %
Saturated CTR
IC / IF (sat)
%
IC(off) IC (ratio)
I (I = I , V = 5V) Note 4 : IC(ratio)= C2 F F2 CE IC1(IF = IF1, VCE = 5V)
IC1 IF1 IC2 IF2 VCE
3
2007-10-01
TLP180
Isolation Characteristics (Ta = 25C)
Characteristic Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0V, f = 1 MHz VS = 500 V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Min. 5x10
10
Typ. 0.8 10
14
Max.
Unit pF Vrms Vdc
3750
10000 10000
Switching Characteristics (Ta = 25C)
Characteristic Rise time Fall time Turn-on time Turn-off time Turn-on time Storage time Turn-off time Symbol tr tf ton toff tON ts tOFF RL = 1.9 k VCC = 5 V, IF = 16 mA (Fig.1) VCC = 10 V, IC = 2 mA RL = 100 Test Condition Min. Typ. 2 3 3 3 2 25 40 Max. s s Unit
Fig. 1: Switching time test circuit
IF RL IF tS VCE tON VCC 4.5V 0.5V tOFF
VCC VCE
4
2007-10-01
TLP180
IF - Ta
100 200
PC - Ta
Allowable forward current IF (mA)
80
60
40
Allowable collector power dissipation PC (mW)
0 20 40 60 80 100 120
160
120
80
20
40
0 -20
0 -20
0
20
40
60
80
100
120
Ambient temperature Ta (C)
Ambient temperature Ta (C)
IFP - DR
3000 Pulse width 100s 100
IF - VF
Pulse forward current IFP (mA)
IF (mA) Forward current
-3 -2 -1 0
1000 500 300
Ta = 25C 10
1
100 50 30
0.1
10 3
0.01 85C 0.001 0 25 C 0.8 -25C
10
3
10
3
10
3
10
Duty cycle
ratio DR
0.4
1.2
1.6
2
Forward
25 C
voltage VF (V)
VF / Ta - IF
-3.2 1000
IFP - VFP
Pulse forward current IFP (mA)
500 300
Forward voltage temperature coefficient VF / Ta (mV / C)
-2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1
100 50 30
10 5 3 1 0.6 Pulse width 10s Repetitive frequency = 100Hz Ta = 25C
0.3 0.5
1
3
5
10
30
50
1.0
1.4
1.8
2.2
2.6
3.0
Forward
current
IF (mA)
Pulse forward
voltage
VFP (V)
5
2007-10-01
TLP180
IC - VCE
50 Ta = 25C 50mA 30 Ta = 25C
IC - VCE
50mA 40mA 30mA 20 20mA
Collector current IC (mA)
30mA 20mA 15mA 10mA
30
Collector current IC (mA)
40
20
PC(MAX.) IF = 5mA
10mA 10 5mA
10
2mA
0 0
2
4
6
8
10
0 0
0.2
0.4
0.6
0.8
1.0
Collector-emitter voltage
VCE (V)
Collector-emitter voltage
VCE (V)
IC - IF
100 Ta = 25C 10
1
ICEO - Ta
Collector current IC (mA)
30 10 5 3 Sample B 1 0.5 0.3 0.1 0.1 VCE = 10V VCE = 5V VCE = 0.4V 0.3 0.5 1 3 5 10 30 50
Collector dark current ID(ICEO) (A)
50
10
0
Sample A
10
-1
VCE = 48V 24V
10
-2
10V 5V
Forward
current
IF (mA)
10
-3
10
-4
0
20
40
60
80
100
IC / IF - IF
1000 Ta = 25C
Ambient temperature Ta (C)
500
Current transfer ratio
300 Sample A
(%) IC / IF
100 Sample B 50 30
VCE = 10V VCE = 5V VCE = 0.4V
10 0.1
0.3 0.5
1
3
5
10
30
50
Forward
current
IF (mA)
6
2007-10-01
TLP180
VCE(sat) - Ta
0.24 IF = 1mA IC = 0.2mA 100
IC - Ta
VCE = 5V IF = 25mA 10mA 5mA 10 5 3
Collector-emitter saturation voltage VCE(sat) (V)
Collector current IC (mA)
0.20
50 30
0.16 IF = 5mA, IC = 1mA 0.12 IF = 1mA, IC = 0.2mA
0.08
0.04
1mA 0 -40 1 -20 0 20 40 60 80 100 0.5 0.3 0.5mA
Ambient
temperature
Ta
(C)
0.1
Switching
1000 Ta = 25C IF = 16mA 500 VCC = 5V 300
Time
- RL
-20
0
20
40
60
80
100
Ambient temperature Ta (C)
Switching
tOFF 160 50
Time - Ta
100
tOFF ts
30
(s)
50 30
ts
(s) Switching time
Switching time
10
5 3 tON 1
10
5 0.5 3 0.3 tON 1 1 0.1 3 5 10 30 50 100 IF = 16mA VCC = 5V RL = 1.9k -20 0 20 40 60 80 100
Load
resistance RL
(k)
Ambient temperature Ta (C)
7
2007-10-01
TLP180
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
8
2007-10-01

▲Up To Search▲

Price & Availability of TLP18007

	To Download TLP18007 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .